This is a Sterling gas wall and ceiling unit heater. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are also some cosmetic scuffs and scratches throughout the unit as well as some slight dents. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Gas Wall and Ceiling Unit Heater |
| Product Type | High-Efficiency Unit Heater |
| Fuel Type | Natural Gas |
| Combustion Type | Field Convertible |
| Heating Capacity Input | 150,000 BtuH |
| Heating Capacity Output | 143,000 BtuH |
| Fan Type | Propeller |
| Thermal Efficiency Rating | 95% |
| Flue Diameter | 2 in |
| Overall Height | 18-3/4 in |
| Overall Width | 54-13/16 in |
| Overall Depth | 41 in |
| Air Flow | 2,661 cfm |
| Air Flow Direction | Horizontal |
| Air Temperature Rise | 50°F |
| Burner Air Inlet Size | 2 in |
| Drive Type | Direct |
| Fan Diameter | 16 in |
| Frequency | 60 Hz |
| Gas Connection Size | 1/2 in |
| Gas Connection Type | NPT, Male |
| Heat Exchanger Gauge | 20 ga |
| Heat Exchanger Material | Stainless Steel |
| Heat Output | 143,000 BtuH |
| Heater Voltage | 115VAC |
| Heating Method | Fan Forced |
| Ignition Type | Direct Spark |
| Indoor Air Discharge Height | 15-7/8 in |
| Indoor Air Discharge Width | 26 in |
| Maximum Amperage | 17.6 A |
| Motor Speed | 1,500 RPM |
| Motor Type | PSC |
| Mounting Height | 8 ft to 20 ft |
| Mounting Hole Diameter | 3/4 in |
| Mounting Location | Ceiling |
| Off Center Mounting | 38 in |
| Phase | 1 |
| Profile Type | Standard |
| Vent Type | Power |
| Thermostat Included | No |