This is a U.S. Motors commercial duty pump motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There is a dent on the capacitor cover. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Commercial Duty Pump Motor |
| Manufacturer Part Number | EC1002 |
| Motor Design | Capacitor-Start |
| Motor Enclosure Design | Open Dripproof |
| Bearing Protection | Double Seals |
| Body Dia. | 5.6 in |
| Bolt Circle Dia. | 5-7/8 in |
| Conduit Box Position | F1 |
| No. of Speeds | 1 |
| HP | 1 |
| Nameplate RPM | 3,450/2,850 |
| Voltage | 208-230/460VAC |
| Hz | 60/50 |
| Full Load Amps | 12.8/6.7-6.4 |
| Phase | Single |
| Max. SF Amps | 15.4/8.5-7.7 |
| Duty Cycle | Continuous |
| Frame | 56C |
| Height | 8-1/16 in |
| Ins. Class | B |
| Max. Ambient Temp. | 40 °C |
| Motor Application | Pump |
| Motor Bearings | Ball |
| Motor Mounting Type | Face |
| Motor Service Factor | 1.4 |
| Motor Shaft Design | Keyed |
| Motor Shaft Rotation | CCW |
| Motor Thermal Protection | None |
| Overall Length | 12-3/16 in |
| Shaft Dia. | 5/8 in |
| Usable @ 208V | Yes |
| Weight | 25 lb |