This is a U.S. Motors direct drive centrifugal blower motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Direct Drive Centrifugal Blower Motor |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Open Air-Over |
| No. of Speeds | 3 |
| HP | 1/12 |
| Nameplate RPM | 1,375 |
| Voltage | 115-127VAC |
| Hz | 60 Hz |
| Full Load Amps | 1.35 A |
| Phase | Single |
| Duty Cycle | Continuous |
| Frame | 42 |
| Motor Thermal Protection | Auto |
| Ins. Class | B |
| Motor Shaft Rotation | CCW |
| Shaft Dia. | 1/2 in |
| Shaft Length | 6-1/2 in |
| Motor Bearings | 6201 (Opposite End Bearing); 6201 (Shaft End Bearing) |
| Overall Length | 11-3/8 in |
| Length Less Shaft | 4-7/8 in |
| Body Dia. | 5 in |
| Weight | 6.6 lb |