This is a Marathon Motors general purpose motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | General Purpose Motor |
| Motor Application | General Application |
| Motor Design | Capacitor-Start |
| Motor Enclosure Design | Open Dripproof |
| Duty Cycle | Continuous |
| No. of Speeds | 1 |
| HP | 1/2 |
| Nameplate RPM | 3,450 |
| Voltage | 115/208-230VAC |
| Hz | 60 Hz |
| Full Load Amps | 8.2/3.9-4.1 A |
| Phase | Single |
| Frame | 48 |
| Ins. Class | B |
| Inverter Rated | No |
| Length Less Shaft | 9-1/2 in |
| Max. Ambient Temp. | 104 °F |
| Motor Bearings | Ball |
| Motor Frame Material | Steel |
| Motor Mounting Position | Horizontal |
| Motor Mounting Type | Cradle Base |
| Motor Service Factor | 1.25 |
| Motor Shaft Design | Flat |
| Motor Shaft Rotation | CW/CCW |
| Motor Thermal Protection | Auto |
| Nominal Efficiency | 66 % |
| Overall Length | 11 in |
| Shaft Dia. | 1/2 in |
| Shaft Length | 1-1/2 in |
| Usable @ 200V | No |
| Usable @ 208V | Yes |
| Weight | 19 lb |