This is a Marathon Motors oil burner motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Oil Burner Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Oil Burner |
| Motor Design | Capacitor-Start |
| Motor Enclosure Design | Open Dripproof |
| No. of Speeds | 1 |
| HP | 1/3 |
| Nameplate RPM | 3,450 |
| Voltage | 115/208-230VAC |
| Hz | 60 Hz |
| Full Load Amps | 5.6/2.7-2.8 A |
| Phase | Single |
| Duty Cycle | Continuous |
| Frame | 48NZ |
| Output Watts | 250 W |
| Usable @ 208V | Yes |
| Usable @ 200V | No |
| Motor Service Factor | 1 |
| Motor Thermal Protection | Manual |
| Ins. Class | B |
| Max. Ambient Temp. | 40 °C |
| Motor Mounting Type | Face |
| Motor Frame Material | Steel |
| Motor Mounting Position | Horizontal or Vertical Shaft Up |
| Motor Shaft Rotation | CW/CCW |
| Shaft Dia. | 1/2 in |
| Shaft Length | 1-3/4 in |
| Lead Length | 20 in |
| Removable Base | No |
| Conduit Box Location | Exterior |
| Conduit Box Position | F1 |
| Motor Bearings | Ball |
| Body Dia. | 6-3/4 in |
| Motor Flange Type | Non-Ventilated |
| Motor Shaft Design | Flat |
| Overall Length | 10-5/16 in |
| Length Less Shaft | 8-3/4 in |
| Weight | 14 lb |
| Nominal Efficiency | 64 % |