This is a Leeson gearmotor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Gearmotor |
| Manufacturer Part Number | M1125004.00 |
| Shaft Orientation | Parallel |
| Output Shaft Type | Keyed |
| Operating Voltage | 90V DC |
| Full Load Current | 0.8 A |
| Motor Type | Gearmotor |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Nameplate Speed | 100 RPM |
| Maximum Output Speed | 100 RPM |
| Maximum Torque | 36 in-lb |
| Input Horsepower | 3/50 hp |
| Rotation | CW/CCW |
| Service Factor | 1 |
| Motor Duty Class | Continuous |
| Thermal Protection | None |
| Motor Insulation Class | F |
| Maximum Ambient Temperature | 40 °C |
| Efficiency | 56.3% |
| Gear Ratio | 18:1 |
| Gear Material | Steel |
| Output Shaft Diameter | 1/2 in |
| Output Shaft Length | 1 in |
| Keyway Type | Square |
| Keyway Width | 1-1/8 in |
| Keyway Depth | 1-1/8 in |
| Keyway Length | 3/4 in |
| Bearing Type | Needle |
| Lubrication | Semi-Fluid Grease |
| Mount Type | Special |
| Mount Hole Center-to-Center Width | 1.88 in |
| Mount Hole Center-to-Center Length | 3.75 in |
| Overall Length | 8.74 in |
| Length Less Shaft | 8.74 in |
| Overall Width | 3.75 in |
| Overall Height | 3.75 in |