This is a Leeson AC gearmotor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | AC Gearmotor |
| Manufacturer Part Number | 107034.00 |
| Nameplate Speed | 59 RPM |
| Maximum Output Speed | 59 RPM |
| Maximum Torque | 496 in-lb |
| Starting Torque | 496 in-lb |
| Input Horsepower | 0.5 hp |
| Overhung Load Capacity | 625 ft-lb |
| Phase | Three |
| Operating Voltage | 208-230/460VAC |
| Service Factor | 1.15 |
| Full Load Current | 2.0/1.0 A |
| Rotation | CW/CCW |
| Base to Center of Shaft | 2.94 in |
| Shaft Orientation | Parallel |
| Number of Output Shafts | 1 |
| Motor Type | 3-Phase |
| Motor Enclosure | Totally Enclosed Fan-Cooled |
| Mounting Orientation | Horizontal Vertical with Shaft Down |
| Motor Duty Class | Continuous |
| Thermal Protection | None |
| Motor Insulation Class | F |
| Maximum Ambient Temperature | 104 °F |
| Capacitor Required | Yes |
| Gear Ratio | 29:1 |
| Brake Type | None |
| Output Shaft Diameter | 3/4 in |
| Output Shaft Length | 1-1/2 in |
| Keyway Type | Square |
| Keyway Width | 15/79 in |
| Keyway Depth | 1-1/16 in |
| Keyway Length | 1 in |
| Bearing Type | Needle |
| Seal Type | Heavy Duty Industrial |
| Lubrication | Heavy Duty Gear Oil |
| Housing Material | Die Cast Aluminum |
| Mount Type | Horizontal or Vertical Shaft Down |
| Mount Hole Center-to-Center Width | 7.13 in |
| Mount Hole Center-to-Center Length | 2.5 in |
| Overall Length | 13.42 in |
| Length Less Shaft | 11.92 in |
| Overall Width | 8.13 in |
| Overall Height | 6.6 in |
| Frequency | 60 Hz |