This is a Jet floor drill press. Please refer to the technical specifications in the listing for more information.
We have inspected this item and it powers on when plugged in. We do not have the capability to test the unit any further. The light is broken off and hanging by the cord. There are also some dents around the unit as well as some cosmetic scuffs and scratches. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Floor Drill Press |
| Drive Type | Belt |
| Speed Control | Fixed |
| Motor Voltage | 115/230VAC ; Single-Phase |
| Voltage | 115/230VAC |
| Phase | Single-Phase |
| Swing | 21-7/8 in |
| Spindle-to-Column Distance | 10-7/8 in |
| Horsepower | 1-1/2 hp |
| Spindle Speed Range | 175 RPM – 3,050 RPM |
| Spindle Speed | 275 to 3,050 RPM |
| Minimum Spindle Speed | 175 RPM |
| Maximum Spindle Speed | 3,050 RPM |
| Current | 7.6 A |
| Drilling Capacity in Steel | 1 in |
| Spindle Travel | 4-13/16 in |
| Drill Press Application | Drilling |
| Power Down Feed Included | No |
| Number of Spindle Speeds | 12 |
| Application | Drilling |
| Base Height | 3-3/8 in |
| Base Length | 22-5/8 in |
| Base Width | 19-1/2 in |
| Chuck Capacity | 5/8 in |
| Chuck Size | 5/8 in |
| Chuck Style | Keyed |
| Column Diameter | 3-5/8 in |
| Coolant System | No |
| Drilling Capacity in Cast Iron | 1-1/4 in |
| Drilling Capacity in Stainless Steel | 1 in |
| Drill Press Type | Floor Stand |
| Maximum Overall Height | 67 in |
| Maximum Spindle-to-Base Height | 48-1/2 in |
| Maximum Spindle-to-Table Height | 28 in |
| Number of Speeds | 12 |
| Number of T-Slots | 3 |
| Overall Length | 35 in |
| Power Source | Corded |
| Primary Material Application | Metal |
| Quill Diameter | 2-5/8 in |
| Speed Control Type | Step Pulley |
| Spindle Taper | 3MT |
| Table Length | 18-5/8 in |
| Table Load Capacity | 176 lb |
| Table Shape | Rectangular |
| Table Slot | Yes |
| Table Slot Width | 5/8 in |
| Table Tilt | 45 ° |
| Table Width | 16-1/8 in |
| Tapping Compatible | No |
| Tilting Angle | 45 ° |
| Tool Weight | 364 lb |