This is a Franklin Electric multi-stage booster pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Multi-Stage Booster Pump |
| Manufacturer Part Number | 96061502 |
| Pump Housing Material | Stainless Steel |
| Motor Enclosure | Open Dripproof |
| Horsepower | 1 hp |
| RPM (Maximum) | 3,450 RPM |
| Nameplate Voltage | 115/230VAC |
| Frequency | 60 Hz |
| Phase | Single |
| Flow Rate @ 30 psi | 25 gpm |
| Flow Rate @ 40 psi | 23 gpm |
| Flow Rate @ 50 psi | 19 gpm |
| Flow Rate @ 60 psi | 15 gpm |
| Flow Rate @ 80 psi | 7 gpm |
| Shut Off Pressure | 88 psi |
| Intake and Discharge Size | 1-1/4 in , 1 in |
| Connection Type | NPT |
| Mounting Orientation | Horizontal |
| For Use With Potable Systems | Yes |
| Number of Stages | 4 |
| Compatible Intake Pipe Size | 1-1/4 in |
| Compatible Discharge Pipe Size | 1 in |
| Discharge Type | NPT |
| Case Pressure (Maximum) | 150 psi |
| Overall Height | 8 in |
| Overall Length | 19.07 in |
| Impeller Material | Stainless Steel |
| Overall Width | 7 in |
| Motor Ambient Temperature (Maximum) | 104 °F |
| Wetted Material | Stainless Steel |
| Compatible with Media Type | Water |
| Seal Material | Carbon; Ceramic; Fluoroelastomer (FKM) |
| Media Temperature (Maximum) | 225 °F |
| Pumping Application | Fountains; Lawn Sprinkler Systems; Pressure Boosting; Turf Irrigation; Wash Down Applications; Water Transfer |
| Motor Ambient Temperature (Minimum) | 40 °F |
| Duty Cycle | Continuous |
| Thermal Overload Protection | Yes |
| Suction Lift (Maximum) | 10 ft |
| Priming | Self-Priming |
| Series | MH |