This is a Century unit heater motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. The mounting bolts are bent. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Unit Heater Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Unit Heater |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Totally Enclosed |
| No. of Speeds | 2 |
| HP | 1/3 |
| Nameplate RPM | 1,100 |
| Voltage | 115VAC |
| Hz | 60 Hz |
| Full Load Amps | 4.3-1.8 A |
| Phase | Single |
| Duty Cycle | Continuous |
| Frame | 48Y |
| Usable @ 208V | No |
| Usable @ 200V | No |
| Motor Thermal Protection | Auto |
| Motor Service Factor | 1 |
| Ins. Class | B |
| Motor Shaft Rotation | CW/CCW |
| Max. Ambient Temp. | 40 °C |
| Lead Length | 58 in |
| Motor Mounting Position | All Angle |
| Number of Shafts | 1 |
| Motor Frame Material | Steel |
| Shaft Dia. | 1/2 in |
| Shaft Length | 5 in |
| Motor Bearings | Ball |
| Motor Shaft Design | Flat |
| Conduit Box Position | F3 |
| Conduit Box Location | Exterior |
| Overall Length | 11-1/8 in |
| Length Less Shaft | 6-1/8 in |
| Mounting Holes | (4) #8-32 |
| Body Dia. | 5-5/8 in |
| Weight | 16 lb |
| Bolt Circle Dia. | 5-1/8 in |
| Stud Size | #8-32 |
| Ring to Ring Center | 5-11/16 in |