This is a Century direct drive blower motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Direct Drive Blower Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Open Air-Over |
| No. of Speeds | 3 |
| HP | 1/3 |
| Nameplate RPM | 1,625 |
| Voltage | 115VAC |
| Hz | 60 Hz |
| Full Load Amps | 4 A |
| Phase | Single |
| Frame | 48Y |
| Usable @ 208V | No |
| Usable @ 200V | No |
| Motor Thermal Protection | Auto |
| Motor Service Factor | 1 |
| Ins. Class | A |
| Max. Ambient Temp. | 40 °C |
| Lead Length | 26 in |
| Motor Mounting Type | Ring |
| Motor Mounting Position | All Angle |
| Number of Shafts | 1 |
| Motor Frame Material | Steel |
| Motor Shaft Rotation | CW/CCW |
| Shaft Dia. | 1/2 in |
| Shaft Length | 6-7/16 in |
| Motor Bearings | Ball |
| Motor Shaft Design | Flat |
| Overall Length | 11-9/16 in |
| Length Less Shaft | 5-5/8 in |
| Mounting Holes | (4) #8-32 |
| Body Dia. | 5-5/8 in |
| Stud Quantity | 4 |
| Weight | 13 lb |
| Mounting Stud Location | Shaft End |
| Stud Size | #8-32 |
| Ring to Ring Center | 5-3/16 in |
| Resilient Ring Dia. | 2-1/4 in |