This is a Century condenser fan motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
Item | Condenser Fan Motor |
Motor Application | HVAC/R |
Motor Sub Application | Condenser Fan |
Motor Design | Permanent Split Capacitor |
Motor Enclosure Design | Open Air-Over |
No. of Speeds | 2 |
HP | 1/3 |
Nameplate RPM | 1,075 |
Voltage | 460V AC |
Hz | 60 Hz |
Full Load Amps | 1.2 A |
Phase | Single |
Duty Cycle | Continuous |
Frame | 48Y |
Output Watts | 250 W |
Usable @ 208V | No |
Usable @ 200V | No |
Motor Service Factor | 1 |
Motor Thermal Protection | Auto |
Ins. Class | B |
Max. Ambient Temp. | 60 °C |
Motor Shaft Rotation | CW/CCW |
Motor Mounting Type | Stud |
Motor Frame Material | Steel |
Motor Mounting Position | All Angle |
Shaft Length | 6-7/16 in |
Lead Length | 27 in |
Shaft Dia. | 1/2 in |
Motor Bearings | Ball |
Body Dia. | 5-5/8 in |
Motor Shaft Design | Double-Flat |
Overall Length | 11-15/16 in |
Length Less Shaft | 5-1/2 in |
Weight | 15 lb |
Mounting Stud Length | 1-5/8 in |
Bolt Circle Dia. | 5-3/16 in |
Stud Size | #8-32 |
Mounting Stud Pattern | 3-5/8 in x 3-5/8 in |
Nominal Efficiency | 61 % |
Stud Quantity | 4 |