This is a Bison AC gearmotor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | AC Gearmotor |
| Manufacturer Part Number | 026-730A0080 |
| Nameplate Speed | 21 RPM |
| No Load Speed | 21.56 RPM |
| Maximum Torque | 766 in-lb |
| Input Horsepower | 0.33 hp |
| Overhung Load Capacity | 820 ft-lb |
| Phase | Single |
| Operating Voltage | 115VAC |
| Frequency | 60 Hz |
| Full Load Current | 4.84 A |
| Rotation | CW/CCW |
| Base to Center of Shaft | 2.28 in |
| Shaft Orientation | Right Angle |
| Output Shaft Type | Hollow |
| Motor Type | Permanent Split Capacitor |
| Motor Enclosure | Totally Enclosed Fan-Cooled |
| Mounting Orientation | Any Angle |
| Inverter Rated | No |
| Thermal Protection | None |
| Motor Insulation Class | F |
| Maximum Ambient Temperature | 104 °F |
| Capacitor Required | Yes |
| Compatible Capacitor | 24MA50 |
| Gear Ratio | 80:1 |
| Gear Type | Hypoid |
| Gear Material | Steel |
| Brake Type | None |
| Output Shaft Diameter | 1-1/4 in |
| Keyway Type | 1/4 sq in x 1/4 in |
| Keyway Width | 1/4 in |
| Keyway Depth | 1/4 in |
| Bearing Type | Ball |
| Seal Type | Double Lip Output |
| Lubrication | PowerSTAR EP |
| Housing Material | Die Cast Aluminum |
| Housing Material Finish | Painted |
| Mount Type | Any Position |
| Mount Hole Center-to-Center Width | 3.63 in |
| Mount Hole Center-to-Center Length | 6.14 in |
| Overall Length | 16.09 in |
| Length Less Shaft | 16.13 in |
| Overall Width | 5.61 in |
| Overall Height | 7.63 in |