This is a U.S. Motors belt drive motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand but appears to be missing the key. There is a dent on the capacitor cover. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Belt Drive Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive Fan/Blower |
| Motor Design | Capacitor-Start |
| Motor Enclosure Design | Open Dripproof |
| No. of Speeds | 1 |
| HP | 1 |
| Nameplate RPM | 1,725 |
| Voltage | 115/208-230VAC |
| Hz | 60 Hz |
| Full Load Amps | 13.8/6.8-6.9 A |
| Phase | Single |
| Duty Cycle | Continuous |
| Frame | 56 |
| Usable @ 208V | Yes |
| Usable @ 200V | No |
| Motor Service Factor | 1.15 |
| Motor Thermal Protection | Auto |
| Ins. Class | B |
| Max. Ambient Temp. | 104 °F |
| Motor Mounting Type | Cradle Base |
| Motor Mounting Position | All Angle |
| Motor Frame Material | Steel |
| Motor Shaft Rotation | CW/CCW |
| Shaft Dia. | 5/8 in |
| Shaft Length | 1-7/8 in |
| Motor Shaft Design | Keyed |
| Motor Bearings | Ball |
| Length Less Shaft | 9-1/2 in |
| Body Dia. | 6-1/2 in |
| Ring to Ring Center | 9-1/8 in |
| Resilient Ring Dia. | 2-1/2 in |